Protective Sputum Suction Device
Protective sputum suction device for inline closed suction without disconnecting the ventilator. Designed with sealed operation port, cross-split seal sleeve, stop sleeve and optional HME with expiratory filter and CO2 monitoring port.
Inline adapter allows suction access through sealed Port C while the ventilator circuit remains connected.
Cross-split seal and stop sleeve help reduce splash exposure during catheter insertion and withdrawal.
Port A for ETT / tracheostomy, Port B for ventilator circuit and Port C for sealed suction access.
Standard adapter, adapter with HME, CO2 monitoring port and bronchoscopy-assist accessories.
EO sterile pouch, private label, custom carton and procedure-ready pack support.
Tell us adapter type, port configuration, HME request, bronchoscopy-assist accessories and monthly quantity.
Why Choose Protective Sputum Suction Devices
Designed for closed suction workflows where continuous ventilation, splash protection and easier airway access are important.
Continuous Ventilation
Closed suction access can be performed without routine ventilator disconnection during typical use.
Splash Protection
Cross-split seal sleeve and stop sleeve design help limit splash and aerosol exposure during operation.
Bronchoscopy Assist
Optional procedure accessories can assist fiberoptic bronchoscopy while ventilator support is maintained.
OEM Ready Supply
Adapter configuration, HME option, CO2 port, label and carton artwork can be customized.
Product Overview
Review port configuration, seal design, HME option, CO2 sampling port and sterile packaging before confirming your specification.
Designed for ETT / tracheostomy connection, ventilator circuit connection and sealed suction access.
A / B / C Three-Way Adapter
Port A connects to ETT or tracheostomy, Port B connects to ventilator circuit and Port C provides sealed suction access.
HME + CO2 Port + Sleeve Kit
Optional HME, expiratory filter, CO2 sampling port and bronchoscopy-assist accessories can be configured.
Select Protective Suction Configuration
Click one option to sync the selected configuration with both RFQ forms. This helps your inquiry include a clear product request.
Three-Way Closed Suction Adapter
T-connector with sealed operation port for closed suction under continuous ventilation.
- Port A: ETT / tracheostomy
- Port B: ventilator circuit
- Port C: sealed suction access
Adapter with HME and CO2 Port
Closed system with heat and moisture exchanger, expiratory filter and side CO2 sampling port.
- Detachable HME option
- CO2 monitoring port
- Keeps closed circuit off ventilator
Bronchoscopy-Assist Kit
Accessories to assist fiberoptic bronchoscopy while maintaining ventilator support according to protocol.
- Sealed access aids
- Protective sleeve accessories
- Procedure-ready pack option
At-a-Glance Buying Information
Use these common buying details to prepare a faster quotation request.
T-shaped protective sputum suction device for ETT / tracheostomy connection.
Patient port, ventilator port and sealed suction operation port.
Optional HME, CO2 monitoring port and bronchoscopy-assist accessories.
EO sterile pouch, OEM label and export carton support available.
Technical Specifications
Final specification can be adjusted according to port configuration, HME option, CO2 port, seal design, bronchoscopy accessories and packaging requirement.
| Product Name | Protective Sputum Suction Device |
|---|---|
| Type | T-shaped three-way closed suction adapter for ETT / tracheostomy use |
| Ports | Port A: patient ETT / tracheostomy; Port B: ventilator circuit; Port C: sealed operation / suction port |
| Seal System | Cross-split seal sleeve and stop sleeve for self-closing, anti-splash operation |
| Options | Detachable HME with expiratory filter, CO2 sampling port, bronchoscopy-assist accessories |
| Materials | Medical-grade polymers and soft elastomers; latex-free and DEHP-free options available |
| Sterilization | EO sterile, single-use packaging |
| Compliance | ISO 13485 quality management system; ISO 10993 biocompatibility support |
| Patent | CN Invention Patent: ZL 2019 1 0141806.5 |
| Packaging | 1 pc / pouch, 50–100 pcs / carton; private label and custom carton available |
For use by trained clinicians only. Follow hospital policy and the official product IFU. Maintain appropriate PPE during suction and airway procedures.
How It Works
High-level workflow overview. Follow local clinical protocol and the official IFU during use.
Connect
Attach Port A to ETT / tracheostomy and Port B to the ventilator circuit according to protocol.
Prepare
Confirm suction setting, PPE, HME option and CO2 monitoring port if required.
Suction
Insert catheter through sealed Port C; the cross-split seal opens on entry and closes after withdrawal.
Maintain
Ventilation remains continuous in typical use while the sealed access helps limit splashes.
Clinical Evidence Highlights
Use these points as a product evidence summary for buyer communication and internal evaluation.
Closed Suction Support
Compared with open suction, closed suction with the device showed a smaller decrease in blood oxygen saturation in the referenced clinical study.
Reduced Environmental Detection
Bacteria were scarcely detected on operators’ hands and surrounding environment after closed suction in the reported study setting.
Convenience & Protection
Nurses reported higher satisfaction with protection and convenience compared with open suction in the single-center clinical study.
Procurement & OEM Support
Built for hospitals, distributors and medical disposable buyers who need stable closed suction adapter supply and clear configuration support.
Build a Protective Suction Device for Your Market
Confirm adapter type, patient port, ventilator port, sealed suction access, HME option, CO2 port, bronchoscopy accessories, sterile pouch, carton label and destination market. Our team can help convert your requirement into a clear quotation and sample configuration.
Send Detailed RFQ
Configuration Confirmation
Confirm port configuration, HME, CO2 port, seal design and bronchoscopy accessories before sample arrangement.
OEM Label & Carton
Private label pouch, carton artwork, barcode and market-specific information can be discussed.
Sample Arrangement
Sample-first confirmation helps verify port fit, seal function, HME assembly and packaging details.
Frequently Asked Questions
Common questions from hospitals, distributors and airway care disposable procurement teams.
Do we have to disconnect the ventilator to suction?
No. The sealed Port C allows suction without ventilator disconnection during typical closed suction use.
Can it assist bronchoscopy?
Yes. Optional accessories can assist fiberoptic bronchoscopy while maintaining ventilator support according to protocol.
What standards does it meet?
The product is manufactured under ISO 13485 quality management with ISO 10993 biocompatibility support and EO sterile packaging.
Does it include HME and CO2 monitoring port?
Standard adapter, adapter with HME, expiratory filter and CO2 sampling port options can be supplied according to your request.
Can I request OEM packaging?
Yes. Private label pouch, carton artwork, barcode and market-specific packaging information can be customized.
What information should I send for a fast quote?
Please provide configuration, patient port, HME option, CO2 port, bronchoscopy accessory request, sterile packaging, monthly quantity and destination market.
Detailed RFQ Form
For accurate quotation, please include device configuration, port types, HME option, CO2 port, bronchoscopy accessories, sterility, packaging request and estimated order volume.
- Standard adapter, adapter + HME or bronchoscopy-assist kit request
- Patient port: ETT, tracheostomy or universal connector requirement
- Ventilator port, sealed suction port and seal system requirement
- HME, expiratory filter, CO2 monitoring port and sleeve accessories
- Monthly quantity, destination market, sterile pouch and sample request
OEM / ODM, private pouch artwork, carton label support, sample arrangement and export packaging can be discussed according to your protective sputum suction device specification and target market requirements.
Ready to Source Protective Sputum Suction Devices?
Send your configuration and monthly quantity. Our team will help confirm product option, packaging, quotation and sample arrangement.