Disposable Suction Canister Liner
Disposable suction canister liner system for operating room, ICU and clinical suction waste management. Designed with liner bag, lid, patient inlet, vacuum port, hydrophobic filter, float shutoff and optional solidifier or manifold connection.
Hydrophobic filter and mechanical float shutoff help protect the vacuum source from overflow.
Single-use liner supports quick replacement and helps reduce reusable canister cleaning workload.
1000 mL, 1500 mL, 2000 mL, 3000 mL or custom capacity.
Patient inlet, vacuum port, filter, shutoff and optional manifold port.
Designed for common reusable rigid suction canisters with adapter support.
Tell us capacity, lid structure, filter, float shutoff, solidifier, manifold option and monthly quantity.
Why Choose Disposable Suction Canister Liners
Designed for closed suction waste management where overflow protection, fast changeover and safer disposal are important.
Overflow Shutoff
Hydrophobic filter and float shutoff help reduce overflow risk and protect suction equipment.
Closed Disposal
Ports can be capped after use to support closed transport and safer medical waste handling.
Fast Room Turnover
Single-use liner allows quick replacement, helping reduce reusable canister cleaning time.
OEM Ready Supply
Capacity, lid, filter, manifold, solidifier, label and carton can be customized for your market.
System Overview
Review the liner, lid, cap, ports and suction tubing connection before confirming your specification.
Designed for clinical suction collection systems in OR, ICU and treatment areas.
Stacked Disposable Liners
Prepared liners help support fast room changeover and efficient suction waste management.
Patient Inlet + Vacuum Port
Connect patient tubing and vacuum line according to the lid marking and hospital protocol.
Select Suction Canister Liner Configuration
Click one option to sync the selected configuration with both RFQ forms. This helps your inquiry include a clear product request.
Liner + Lid with Shutoff Filter
Disposable liner bag with lid, patient inlet, vacuum port, hydrophobic filter and mechanical float shutoff.
- 1000 / 1500 / 2000 / 3000 mL
- Patient inlet and vacuum port
- Overflow protection design
Liner + Solidifier
Pre-measured solidifier option helps convert liquid medical waste into gel for safer handling and transport.
- Fast gelling option
- Odor-control option
- Reduced spill risk during disposal
Manifold / Tandem Connection
Connection kit for series or parallel canister linking when higher capacity or multi-point suction is required.
- Manifold / tandem port option
- Anti-backflow check option
- Color-coded caps and ports
At-a-Glance Buying Information
Use these common buying details to prepare a faster quotation request.
Disposable liner bag and lid system for suction waste collection.
1000 mL, 1500 mL, 2000 mL, 3000 mL and custom sizes.
Hydrophobic bacterial / viral filter and mechanical float shutoff options.
OEM pouch, label and export carton can be customized.
Technical Specifications
Final specification can be adjusted according to capacity, lid type, ports, filter, shutoff, material, manifold, solidifier and packaging requirement.
| Product Name | Disposable Suction Canister Liner |
|---|---|
| Type | Disposable suction canister liner system, including liner bag and lid with ports / filters |
| Capacities | 1000 mL, 1500 mL, 2000 mL, 3000 mL; custom sizes available on request |
| Ports | Patient inlet, vacuum port, optional manifold / tandem connection port and optional sampling port |
| Protection | Hydrophobic bacterial / viral filter, mechanical float shutoff, optional odor filter |
| Solidifier | Optional pre-measured gel powder or odor-control solidifier for medical waste handling |
| Materials | PE / EVA liner, PP lid, TPE / silicone gasket; latex-free and DEHP-free options available |
| Compatibility | Designed for common reusable rigid canisters from 1–3 L with adapter ring or mount support |
| Sterility | Sterile or non-sterile options; single-use product |
| Compliance | ISO 13485 quality management system; ISO 10993 biocompatibility support; ISO 10079 suction reference |
| Packaging | 1 set / pouch, 25–50 sets / carton; private label and custom carton available |
Use according to hospital infection-control and medical waste regulations. Do not bypass overflow shutoff. Replace the liner when full or contaminated.
Quick Setup Guide
Clear setup steps help clinical teams prepare the suction canister liner before use.
Seat
Place the disposable liner into the rigid canister and press the lid until the gasket seats evenly.
Connect
Connect patient tubing to the inlet and vacuum line to the vacuum port. Add manifold if required.
Verify
Apply suction and check flow, lid seal, filter position and shutoff operation before use.
Seal & Dispose
When full, stop suction, cap the ports, remove the liner and dispose according to hospital policy.
Procurement & OEM Support
Built for hospitals, distributors and medical disposable buyers who need stable suction liner supply and clear configuration support.
Build a Suction Canister Liner for Your Market
Confirm capacity, rigid canister compatibility, lid structure, patient inlet, vacuum port, filter, float shutoff, solidifier, manifold connection, sterile or non-sterile packaging and destination market. Our team can help convert your requirement into a clear quotation and sample configuration.
Send Detailed RFQ
Configuration Confirmation
Confirm capacity, lid, filter, shutoff, ports, canister fit, manifold and solidifier options before sample arrangement.
OEM Label & Carton
Private label pouch, carton artwork, barcode and market-specific information can be discussed.
Sample Arrangement
Sample-first confirmation helps verify liner fit, lid seal, suction performance, port structure and packaging details.
Frequently Asked Questions
Common questions from hospitals, distributors and suction waste management procurement teams.
Will the float shutoff protect the vacuum line?
Yes. When fluid reaches the maximum level, the float closes to stop flow and helps protect the vacuum source from overflow.
Do I need solidifier?
Solidifier converts liquids into gel for safer transport and disposal. Some facilities request this for medical waste handling.
Is it compatible with my current rigid canisters?
Our liners are designed for common 1–3 L rigid canisters. Please send your canister brand, model or dimensions for confirmation.
Sterile or non-sterile?
Both sterile and non-sterile options can be discussed according to your OR / ICU workflow and sourcing policy.
Can I request manifold or tandem connection?
Yes. Manifold and tandem connection options can be supplied for higher-capacity or multi-point suction setups.
What information should I send for a fast quote?
Please provide capacity, lid type, port layout, filter, shutoff, solidifier, manifold request, monthly quantity, target market and packaging requirement.
Detailed RFQ Form
For accurate quotation, please include capacity, lid type, ports, filter, shutoff, solidifier, manifold option, packaging request and estimated order volume.
- Liner capacity: 1000 mL, 1500 mL, 2000 mL, 3000 mL or custom
- Lid type, patient inlet, vacuum port and filter requirement
- Float shutoff, manifold, tandem connection or sampling port request
- Solidifier powder, odor-control option and packaging requirement
- Monthly quantity, destination market and sample request
OEM / ODM, private pouch artwork, carton label support, sample arrangement and export packaging can be discussed according to your suction canister liner specification and target market requirements.
Ready to Source Disposable Suction Canister Liners?
Send your capacity, lid design and monthly quantity. Our team will help confirm product option, packaging, quotation and sample arrangement.