Reinforced Circuit with Water Trap
Disposable reinforced corrugated breathing circuit with optional single or dual water traps for anesthesia machines, ICU ventilators and hospital respiratory care procurement. Built for anti-kink stability, condensate control and distributor-ready OEM packaging.
Why Choose DIYI Reinforced Breathing Circuits
A practical disposable breathing circuit choice for procurement teams requiring anti-kink tubing, flexible water trap options and consistent packaging support.
Anti-crush Reinforced Tubing
Helical reinforcement helps reduce kinking, accidental compression and tubing collapse during clinical positioning.
Condensate Management
Single or dual water trap options help collect condensation during anesthesia, ICU ventilation and humidified use.
Flexible Accessory Options
Optional sampling port, swivel elbow, HME/HMEF and connector combinations can be discussed for your market.
Distributor Supply Support
Private label pouch, carton artwork, sample arrangement and OEM packaging support for medical distributors.
At-a-Glance Specifications
Common specification references for quotation. Final details can be confirmed according to device mode, patient size and target market.
Corrugated Y-piece breathing circuit.
Flexible condensate control options.
Adult and pediatric configurations.
Carton and OEM packaging support.
Technical Specifications
Specification can be adjusted according to anesthesia machine, ICU ventilator mode and procurement requirements.
| Product Name | Reinforced Corrugated Breathing Circuit with Water Trap |
|---|---|
| Type | Dual-limb reinforced corrugated breathing circuit with Y-piece |
| Intended Devices | Anesthesia machines and ICU ventilators using dual-limb mode |
| Lengths | 1.6 m, 1.8 m, 2.0 m, custom length on request |
| Diameters | Adult 22 mm, pediatric 15 mm, neonatal 10 mm optional |
| Connectors | 22M / 22F machine end, 22F / 15F patient end options |
| Water Trap | No water trap, 1 water trap or 2 water traps; quick-drain options available |
| Accessory Options | Rotating elbow, sampling port, swivel connector, HME / HMEF and custom connector options |
| Materials | EVA / PP / PE / TPU options, latex-free and DEHP-free options available |
| Sterilization | EO sterile, single-use packaging available |
| Packaging | 1 set / pouch, 20–40 sets / carton, custom packing available |
Always verify ventilator or anesthesia machine mode, connector compatibility and perform a leak test before use. Keep water traps upright and follow local IFU and clinical protocol.
Quick Setup
Simple dual-limb configuration helps support efficient setup in OR, ICU and respiratory care environments.
Connect
Attach inspiratory and expiratory limbs to machine ports, then connect the Y-piece and patient elbow.
Add Filter
Place HME or HMEF at the patient side if required by protocol and connect sampling line if needed.
Route & Drain
Position tubing to avoid kinks and keep water traps vertical for proper condensate collection.
Leak Test
Run device system test according to the anesthesia machine or ventilator IFU before patient connection.
Product Details & Application
Review the reinforced tubing structure, water trap configuration and procurement support in a cleaner, more spacious full-width layout.
Reinforced Circuit with Flexible Water Trap Configuration
Reinforced corrugated dual-limb breathing circuit with optional no-trap, single-trap or dual-trap setup for anesthesia and ICU applications.
Designed for stable tubing routing, condensate management and distributor-ready supply support.
Stable Tubing Route
Reinforced corrugated tubing helps maintain airflow path stability when the circuit is moved, bent or positioned around the patient.
Flexible Water Trap Options
Choose no trap, one trap or two traps according to clinical use, humidification condition and target market preference.
Matched for OR & ICU Procurement
Tell us patient size, tubing length, connector type and packaging request. We can help recommend a suitable distributor-ready configuration.
Send Detailed RFQFrequently Asked Questions
Common questions from medical distributors, hospitals and procurement teams.
When should I choose reinforced tubing?
It is suitable for cases requiring better anti-kink and anti-crush stability, especially where the breathing circuit may be repositioned frequently.
Should I choose one water trap or two water traps?
One water trap is common for routine use. Two water traps provide stronger condensate management for longer cases or humidified ventilation.
Can you provide HME / HMEF or sampling port?
Yes. HME, HMEF, sampling port, swivel elbow and other accessory options can be discussed according to your requirement.
Can you support OEM packaging?
Yes. Private label pouch, carton artwork and distributor packaging support are available according to quantity and market requirements.
Detailed RFQ Form
For accurate quotation, please provide your configuration, patient size, tubing length, accessory request and estimated order volume.
- 0 / 1 / 2 water trap configuration
- Adult, pediatric or neonatal size
- Required length and connector type
- Monthly quantity and packaging request
- HME / HMEF, elbow or sampling port if needed
OEM / ODM, pouch artwork, carton label support and sample arrangement are available according to your project requirement.
Ready to Source Reinforced Circuits with Water Trap?
Send your configuration and monthly quantity. Our team will help confirm circuit options, accessories, packaging and sample arrangement.